Servaux offer relay points stations for professional and leisure life-rafts in Le Havre, Marseille, Cannes and Saint-Tropez.
More detailsnavigate_next
Other adsIMMERSION SUITS
The right equipment to preserve crew from hypothermia
Product Overview
The Crew Endurance Plus suit is fully approved to the current SOLAS MED regulations and are designed to protect the wearer’s body from the cooling effects of unintended immersion in water to prolong life and to aid rescue.
Constructed from 5mm fire retardant neoprene, the suit provides good insulation to reduce the risk of cold shock and delay the onset of hypothermia. All seams are glued and blind-stitched to ensure they are totally waterproof. Critical areas, including the foot sole, are also taped for additional reinforcement. Quick and easy to don within the specified two minutes, each is supplied in its own carry bag with donning instructions included on both the bag and the suit. The SOLAS approved reflective tape also makes the wearer conspicuous in the water so as to aid their recovery.
This suit includes a two layer glove system - a five finger integral latex glove provides increased dexterity for donning the suit. Whilst an over-mitten is stowed in its own sleeve pocket and can be donned before evacuation for extra thermal protection.
FEATURES
2-layer glove system for dexterity and thermal protection
50mm nylon lifting strop harness with stainless steel D-ring
Designed to be unpacked and donned in 2 minutes
MED/SOLAS approved reflective tape
Waterproof, durable metal zip
Neoprene face flap
Withstands the impact of a jump into water from 4.5 m
Fire retardant neoprene construction
Resistant to damage by oil, sunlight and seawater
Prevents a typical wearer’s core body
Temperature from dropping by more than 2 ºc
After six hours in calm water of 0-2 ºc
Buddy line and whistle
Ankle adjusters
Important: This immersion suit must be worn with an approved, compatible lifejacket.
More detailsnavigate_nextEasicult Combi: a bacteria detector in your fuel tank
Easicult dipslides are intended for monitoring microbiological contaminations in industrial environments. Using Easicult does not require any microbiological expertise, advance preparation or equipment and the slides can easily be used on-site. The test slides can be used as convenient transport media if further analysis of the samples is needed.
More detailsnavigate_next
